Published: July 29, 2026 · Last updated: October 9, 2026
Dump-based tools for immobilizer, airbag, radio and cluster work. Read the file with your own programmer, upload it here and get the result. These tools never touch your hardware.
- 1,090 modules
Airbag Reset
Clear crash data from an airbag module EEPROM dump.
Open tool - 29 modules
Immo PIN Calculator
Read the immobilizer PIN / CS from a dump.
Open tool - 245 modules
Radio Code Calculator
Recover a car radio or head unit SAFE code.
Open tool - 10 modules
Immo Off
Switch the immobilizer off in an ECU dump.
Open tool - 3 modules
Immo Off (fixed patch)
Switch the immobilizer off in an ECU EEPROM dump with a fixed patch for that exact ECU.
Open tool - 3 modules
Mileage Correction
Read and correct the odometer value in a cluster dump.
Open tool - 1 module
BMW ISN Extractor
Extract the BMW ISN from a dump.
Open tool
Use these tools responsibly, and know your local law.
These tools modify safety- and security-critical control units (airbag, immobilizer, ECU, emissions). In many countries, disabling an immobilizer, clearing DTCs, removing EGR/DPF, or resetting airbag crash data for road use is restricted or illegal, and airbag work directly affects occupant safety. Only use them on vehicles you own or are authorized to work on, only after the underlying fault has been repaired, and check the laws and regulations in your country first. Always verify every file on the bench before writing it to a vehicle. You are responsible for how you use these files.
New to this?
These tools assume you can read and write a module's EEPROM or flash with a programmer, and that you are comfortable with advanced OBD2 and bench programming. If you are not sure where to start, my beginner course walks you through it step by step, from the first read to writing a file back safely.
