How to Change Engine Off When Door Open Behavior on Audi A6 2013 (C7)
This guide shows how to change the engine auto-off behavior when the driver’s door is opened on the Audi A6 C7 2013. By default, the engine stops when you open the door with the engine running — this procedure lets you keep it running, or restore the original behavior.
Affiliate Disclosure: iamcarhacker.com is an Amazon and other affiliate programs Associate. As an Amazon Associate, I earn from qualifying purchases. Full Affiliate disclosure. // some of tested products I got sent for free but it never affects any scoring parameter. Full sponsor policy.
Used tool in this guide
The procedure itself works with any VAG-compatible scanner that supports either one-click apps or long coding (VCDS, VCP, VAS-PC, and similar). Two methods are covered below.
Video: How to change engine off when door open on Audi A6 2013
This video shows how to
Supported vehicles
| Vehicle |
|---|
| a6-c7 |
Technical overview
| Item | Details |
|---|---|
| Vehicle | Audi A6 (C7 / 4G) |
| Year | 2013 |
| System | Central Convenience module (Address 46) |
| Procedure type | One-click app or long coding (hidden bit) |
| Difficulty | Easy |
| Time required | ~5 minutes |
| Prerequisites | Ignition ON, battery > 12.4 V, OBDeleven account, Bluetooth paired, Pro Credit (if required by the app version) |
Step-by-step procedure
Method 1: One-click app (OBDeleven or similar)
- Plug the adapter into the OBD2 port and switch ignition ON.
- Open the app and select the adapter from the Bluetooth device list.
- When prompted, confirm body type and year range (2011–2015).
- Wait for the app to finish loading the vehicle profile.
- Tap the hamburger menu (top-left) → Apps.
- Search for “Engine off when door open” and open it.
- Select Engine keeps running (to keep the engine on when the door opens) or Engine stops running (to restore default).
- Tap Save.
Method 2: Long coding (VCDS, VCP, VAS-PC, or equivalent)
- Connect the scanner to the OBD2 port with ignition OFF, then switch ignition ON and launch the software.
- Click Select → 46 – Central Conv.
- Click Coding – 07 → Long Coding Helper.
- Go to Byte 14.
- Locate Bit 3. This is a hidden bit — it does not appear as a labeled checkbox, so the binary value must be edited directly.
- Change Bit 3 from 0 to 1 (e.g.
00011111) to keep the engine running when the door opens, or back to 0 to restore the default. - Exit the Long Coding Helper and confirm the new coding to save.
- Close the module and test by opening the driver’s door with the engine running.
Additional Information & Compatibility Notes
Before using or purchasing any diagnostic tool for this procedure, always verify compatibility with your exact vehicle model, year and system configuration. Supported functions may vary depending on software version, hardware revision and regional limitations.
Alternative tools
Related guides & background information
Legal & safety notice
This procedure modifies vehicle system settings through the control module. Incorrect use may cause faults or warning lights. Always ensure the vehicle is secured and follow proper safety procedures.
Procedures tested with this scanner
Acoustic confirmation (lock/unlock sound) – Passat B6 2.0 TDI (2008)
Instrument cluster language change – Passat B6 2.0 TDI (2008)
Oil service reset & interval change – Passat B6 2.0 TDI (2008)
Activate Cornering Lights (Fog Lights) – Skoda Rapid 2019Most popular OBD2 guides
Hi, I am Juraj Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars.
Responses