The P3443: Cylinder 6 Deactivation/Intake Valve Control Circuit Low refers to a low voltage condition in the intake valve control circuit for Cylinder 6. This may be caused by faulty wiring, poor connections, or a malfunctioning control solenoid. The intake valve control system regulates airflow into Cylinder 6, and low voltage can prevent the valve from operating correctly, leading to engine performance issues.
P3443 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P3443: Cylinder 6 Deactivation/Intake Valve Control Circuit Low |
| Is it serious? | Yes, this can cause engine performance issues such as misfires, poor idling, and reduced fuel efficiency. |
| Possible causes | – Low voltage in the intake valve control circuit for Cylinder 6 – Faulty wiring or connections – Malfunctioning control solenoid |
| How to diagnose? | – Check the voltage levels in the intake valve control circuit for Cylinder 6 – Inspect wiring and connections for faults – Test the control solenoid for proper operation |
P3443 Meaning
The P3443: Cylinder 6 Deactivation/Intake Valve Control Circuit Low code indicates that the voltage in the intake valve control circuit for Cylinder 6 is lower than expected. This could be caused by damaged wiring, poor connections, or a malfunctioning intake valve control solenoid. Low voltage prevents the intake valve from functioning correctly, leading to poor engine performance such as misfires and rough idling.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional codes related to the intake valve control system for Cylinder 6. | OBD-II Scanner |
| Check Voltage Levels | Use a multimeter to measure the voltage levels in the intake valve control circuit for Cylinder 6. Compare the readings to manufacturer specifications to confirm low voltage. | Multimeter, Diagnostic Tool |
| Inspect Wiring and Connections | Visually inspect the wiring and connections for Cylinder 6’s intake valve control circuit. Look for damaged, loose, or corroded wiring and connections. Repair or replace as necessary. | Flashlight, Multimeter |
| Test Control Solenoid | Test the intake valve control solenoid for Cylinder 6 to ensure it is functioning correctly. Measure its resistance and check it against manufacturer specifications. Replace if necessary. | Multimeter, Mechanic Tools |
| Repair or Replace Faulty Components | Repair or replace any faulty wiring, connectors, or solenoids identified during diagnostics. Ensure all components are properly installed and tested for correct operation. | Mechanic Tools |
| Clear the Code and Test Drive | After completing repairs, clear the fault code using an OBD-II scanner. Take the vehicle for a test drive to ensure the intake valve control system for Cylinder 6 is functioning correctly. | OBD-II Scanner, Vehicle |
| Recheck for Codes | After the test drive, re-scan the vehicle to ensure the P3443 code does not return. If the code reappears, further diagnostics may be necessary. | OBD-II Scanner |
Popular OBD2 guides
See all guides
Best OBD2 scanners in 2025
I constantly test new OBD-II scanners to give you the best options possible. Here is a full list of the best tools in all categories currently.
