The P2655: A Rocker Arm Actuator Control Circuit/Open Bank 2 code indicates an open circuit in the control circuit of the rocker arm actuator ‘A’ on Bank 2. This actuator plays an important role in regulating valve lift, which helps optimize engine performance and efficiency. An open circuit or disconnected wiring can lead to improper actuator operation, resulting in poor engine performance and increased fuel consumption.
P2655 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2655: A Rocker Arm Actuator Control Circuit/Open Bank 2 |
| Is it serious? | Yes, as an open circuit prevents the actuator from operating, leading to incorrect valve lift control, poor engine performance, and increased emissions. |
| Possible causes | – Open circuit or disconnected wiring – Faulty rocker arm actuator – Wiring or connector issues |
| How to diagnose? | – Inspect and test the rocker arm actuator control circuit – Check wiring and connectors for continuity – Replace damaged components |
P2655 Meaning
The P2655: A Rocker Arm Actuator Control Circuit/Open Bank 2 code indicates that the control circuit for the rocker arm actuator ‘A’ in Bank 2 has lost electrical continuity. This open circuit condition can prevent the actuator from adjusting the valve timing correctly, which is necessary for efficient combustion and engine performance. The issue could be due to a broken wire, disconnected connector, or a malfunctioning actuator.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for any related codes that may be present. Addressing other codes may provide additional information on issues affecting the valve timing or actuator systems. | OBD-II Scanner |
| Inspect the Rocker Arm Actuator Control Circuit | Visually inspect the wiring associated with the rocker arm actuator control circuit for Bank 2. Look for any disconnected wires, broken insulation, or obvious signs of damage. Ensure all connectors are properly seated. | Flashlight, Safety Gloves |
| Test Circuit Continuity | Use a multimeter to test the continuity of the control circuit. Verify that the wiring is complete with no breaks, and that there is proper continuity from the ECM to the rocker arm actuator. | Multimeter |
| Inspect the Rocker Arm Actuator | Use a diagnostic tool to test the rocker arm actuator. Verify that the actuator is receiving signals from the ECM and is capable of responding to those signals. If it is non-responsive, it may need replacement. | Diagnostic Tool |
| Check Wiring and Connectors | Inspect all connectors and wiring leading to the actuator for signs of corrosion, loose connections, or damage that could cause an open circuit. Repair or replace any faulty wiring or connectors as needed. | Flashlight, Multimeter |
| Replace Damaged Components | If any components such as connectors, wiring, or the rocker arm actuator itself are found to be damaged or faulty, replace them with components that meet manufacturer specifications. | Replacement Parts |
| Clear the Code and Test Drive | After completing the necessary repairs, use an OBD-II scanner to clear the P2655 code. Start the vehicle and take it for a test drive to verify that the actuator is functioning correctly and the issue is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | Re-scan the vehicle to confirm that the P2655 code has been successfully cleared. If the code reappears, further diagnostics may be required to address any remaining or unresolved issues. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)