The P2619: Crankshaft Position Signal Output Circuit High code refers to a situation where the crankshaft position signal output circuit is generating a higher than expected voltage. This problem can lead to incorrect timing and, consequently, poor engine performance, misfires, and inefficient fuel usage.
P2619 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2619: Crankshaft Position Signal Output Circuit High |
| Is it serious? | Yes, high voltage in the crankshaft position signal circuit can cause improper engine timing, leading to misfires, poor performance, and potential engine damage. |
| Possible causes | – High voltage or signal in the crankshaft position signal output circuit – Faulty crankshaft position signal output system – Wiring or connector issues |
| How to diagnose? | – Measure the voltage in the crankshaft position signal output circuit – Inspect and test the crankshaft position signal output system – Check wiring and connectors – Replace faulty components if needed |
P2619 Meaning
The P2619: Crankshaft Position Signal Output Circuit High code means that the crankshaft position sensor is outputting a signal voltage above the specified range. The crankshaft position sensor is vital for determining the engine’s crankshaft position, allowing the engine control module (ECM) to optimize fuel injection and ignition timing. A high signal could be due to a sensor fault, wiring issues, or electrical interference, which can lead to timing errors, increased emissions, and engine performance problems.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for any other related codes that may provide more insight into the issue. Address these codes first to prevent misdiagnosis. | OBD-II Scanner |
| Measure Voltage in Crankshaft Signal Circuit | Use a multimeter to measure the voltage in the crankshaft position signal circuit. Compare the readings to the manufacturer’s specifications to determine if the voltage is abnormally high. | Multimeter, Diagnostic Tool |
| Inspect Crankshaft Position Sensor | Visually inspect the crankshaft position sensor for any signs of damage, such as cracks or overheating. Verify that it is correctly positioned and free from obstructions. | Flashlight, Safety Gloves |
| Check Wiring and Connectors | Inspect the wiring and connectors for the crankshaft position sensor for loose connections, corrosion, or damage that could result in an improper signal. Repair or replace as needed. | Flashlight, Multimeter |
| Replace Faulty Components | If any parts, including the crankshaft position sensor or wiring, are found to be defective, replace them with components that meet manufacturer specifications. | Replacement Parts |
| Clear the Code and Test Drive | After completing repairs, use an OBD-II scanner to clear the P2619 code. Take the vehicle for a test drive to confirm the crankshaft sensor is working correctly and that the code does not return. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | Re-scan the vehicle after the test drive to verify that the P2619 code has been resolved. If it persists, further diagnostics may be required to identify underlying issues. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)