The P260C: PTO Control Circuit High refers to an issue in which the PTO (Power Take-Off) control circuit is receiving a voltage or signal that is higher than expected. This may be caused by a fault in the PTO control system, issues with wiring, or defective electrical connections. The PTO system is used to transfer power from the engine to auxiliary equipment, which is vital in specialized work vehicles.
P260C – Quick Overview
| Code | Information |
|---|---|
| Meaning | P260C: PTO Control Circuit High |
| Is it serious? | Yes, high voltage can damage the PTO control system, prevent it from functioning properly, and lead to unsafe operating conditions. |
| Possible causes | – High voltage or signal in the PTO control circuit – Faulty PTO control system – Wiring or connector issues |
| How to diagnose? | – Measure the voltage in the PTO control circuit – Inspect and test the PTO control system – Check wiring and connectors – Replace faulty components if needed |
P260C Meaning
The P260C: PTO Control Circuit High code indicates that the PTO control circuit is experiencing a higher voltage than it should. This elevated voltage could lead to malfunction or damage to the PTO system, potentially rendering it inoperative. Common causes include electrical overvoltage, damaged wiring, or a malfunctioning PTO control module, affecting the reliability of auxiliary functions.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to detect if there are any additional codes present. These could help identify related issues that need attention. | OBD-II Scanner |
| Measure Voltage in PTO Circuit | Use a multimeter to measure the voltage in the PTO control circuit. Ensure the voltage falls within manufacturer-recommended limits. | Multimeter, Diagnostic Tool |
| Inspect PTO Control System | Visually inspect the PTO control system components for signs of wear, damage, or failure. Confirm the system is functioning as intended. | Flashlight, Safety Gloves |
| Check Wiring and Connectors | Inspect all wiring and connectors related to the PTO control circuit for signs of damage, corrosion, or loose connections. Repair or replace if necessary. | Flashlight, Multimeter |
| Replace Faulty Components | Replace any faulty components such as the PTO control module or damaged wiring. Ensure that replacements meet vehicle specifications. | Replacement Parts |
| Clear the Code and Test Drive | Clear the P260C code using an OBD-II scanner after making repairs. Test the PTO system to verify that it operates correctly. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After testing, re-scan the vehicle to confirm that the P260C code has been resolved. If the code reappears, further diagnostics are required. | OBD-II Scanner |
Popular OBD2 guides
See all guides
Best OBD2 scanners in 2025
I constantly test new OBD-II scanners to give you the best options possible. Here is a full list of the best tools in all categories currently.
