The P2507: ECM/PCM Power Input Signal Low refers to a problem where the Engine Control Module (ECM) or Powertrain Control Module (PCM) is receiving a low input voltage or signal. This could be due to an issue with the power supply, faulty ECM/PCM, or wiring problems that affect the module’s performance, potentially leading to engine operation issues or failure to start.
P2507 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2507: ECM/PCM Power Input Signal Low |
| Is it serious? | Yes, this code can lead to poor engine performance or failure to start. |
| Possible causes | – Low voltage or signal in the ECM/PCM power input – Faulty ECM/PCM – Wiring or connector issues |
| How to diagnose? | – Measure the voltage and signal of the ECM/PCM power input – Inspect and test the ECM/PCM – Check wiring and connectors – Replace faulty components if needed |
P2507 Meaning
The P2507: ECM/PCM Power Input Signal Low code indicates that the power input to the Engine Control Module or Powertrain Control Module is below the required level. This might result in improper engine control and can affect the overall performance of the vehicle. It is crucial to ensure that the ECM/PCM is getting sufficient power to function correctly.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check if there are additional related codes. These could provide more information about the cause of the low input signal. | OBD-II Scanner |
| Measure Voltage at ECM/PCM | Measure the voltage at the ECM/PCM power input using a multimeter. Ensure that the voltage is within the manufacturer-specified range. | Multimeter |
| Inspect ECM/PCM | Inspect the ECM/PCM for any visible signs of damage or malfunction. Test it according to manufacturer guidelines to verify proper operation. | Diagnostic Tool, Safety Gloves |
| Check Wiring and Connectors | Visually inspect the wiring and connectors leading to the ECM/PCM for corrosion, damage, or loose connections. Repair any damaged wiring. | Flashlight, Multimeter |
| Test Battery and Charging System | Ensure that the battery and charging system are functioning properly, as insufficient power supply can cause this code. | Battery Tester, Multimeter |
| Replace Faulty Components | If any components, such as the ECM/PCM or wiring, are found to be defective, replace them accordingly. | Replacement Parts, Vehicle Owner’s Manual |
| Clear the Code and Test Drive | After repairs, clear the code using an OBD-II scanner and perform a test drive to confirm the issue is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | Re-scan the vehicle after the test drive to ensure the P2507 code has not returned. If it reappears, further diagnostics may be needed. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko