The P2489: Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic Bank 2 Sensor 5 refers to a problem where the exhaust gas temperature sensor (Bank 2 Sensor 5) is sending an inconsistent or erratic signal. This could be due to issues like damaged wiring, poor connections, or a faulty sensor itself. Such erratic signals may impact accurate exhaust gas temperature readings and affect overall engine performance.
P2489 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2489: Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic Bank 2 Sensor 5 |
| Is it serious? | Yes, an intermittent or erratic sensor signal can lead to inaccurate exhaust temperature monitoring and potentially cause inefficient engine performance or damage. |
| Possible causes | – Intermittent or erratic signal in the exhaust gas temperature sensor circuit for Bank 2 Sensor 5 – Faulty sensor – Wiring or connector issues |
| How to diagnose? | – Check for intermittent or erratic issues in the exhaust gas temperature sensor circuit for Bank 2 Sensor 5 – Inspect wiring and connectors – Replace faulty sensor if needed |
P2489 Meaning
The P2489: Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic Bank 2 Sensor 5 code indicates that the signal coming from the exhaust gas temperature sensor for Bank 2 Sensor 5 is irregular. This could be due to faulty wiring, loose connectors, or a failing sensor. Erratic signals may prevent proper monitoring of the exhaust temperatures, causing adverse effects on engine efficiency and leading to potential system damage if not resolved.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for other related codes that could indicate multiple or associated issues. | OBD-II Scanner |
| Monitor Sensor Signal | Use an OBD-II scanner with live data capabilities to monitor the sensor’s output. Observe whether the sensor provides erratic readings during different engine conditions. | OBD-II Scanner with Live Data |
| Inspect the Sensor | Visually inspect the exhaust gas temperature sensor for any physical damage, corrosion, or loose connections. Ensure that it is properly mounted and connected. | Flashlight, Safety Gloves |
| Wiggle Test Wiring and Connectors | Perform a wiggle test by moving the sensor wiring and connectors gently while monitoring sensor readings to detect any signal interruptions or erratic changes. | Flashlight, OBD-II Scanner |
| Inspect Wiring and Connectors | Inspect the wiring and connectors for damage, wear, or corrosion. Ensure all connections are tight and free from rust or other contaminants. Repair or replace as needed. | Flashlight, Multimeter |
| Test Sensor Resistance | Use a multimeter to check the resistance of the exhaust gas temperature sensor. Compare with manufacturer specifications to ensure it is within the correct range. | Multimeter |
| Replace Faulty Sensor | If the sensor is found to be the cause of the erratic signal, replace it with a new sensor to restore proper function. | Replacement Sensor, Tools Set |
| Clear the Code and Test Drive | Clear the code using an OBD-II scanner and take the vehicle for a test drive to verify whether the problem has been resolved. Monitor live sensor data during the drive. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to ensure the P2489 code has not returned. If the code reappears, further diagnostic steps may be needed. | OBD-II Scanner |
Popular OBD2 guides
See all guides
Best OBD2 scanners in 2025
I constantly test new OBD-II scanners to give you the best options possible. Here is a full list of the best tools in all categories currently.
