The P2477: Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic Bank 2 Sensor 4 refers to an issue where the signal from the exhaust gas temperature sensor circuit for Bank 2 Sensor 4 is detected as intermittent or erratic. This could be due to a faulty sensor, issues with wiring, or poor connector conditions, which may cause fluctuating exhaust temperature readings and impact engine performance or emissions.
P2477 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2477: Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic Bank 2 Sensor 4 |
| Is it serious? | Yes, this code can lead to unreliable exhaust temperature readings, which may affect the engine’s performance, fuel efficiency, and emissions. |
| Possible causes | – Intermittent or erratic signal in the exhaust gas temperature sensor circuit for Bank 2 Sensor 4 – Faulty sensor – Wiring or connector issues |
| How to diagnose? | – Check for intermittent or erratic issues in the exhaust gas temperature sensor circuit for Bank 2 Sensor 4 – Inspect wiring and connectors – Replace faulty sensor if needed |
P2477 Meaning
The P2477: Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic Bank 2 Sensor 4 code indicates that the exhaust gas temperature sensor for Bank 2 Sensor 4 is providing an unstable signal. This instability might result from a faulty sensor, poor electrical connections, or damaged wiring, which could cause inconsistent exhaust gas temperature readings, leading to improper exhaust management and reduced engine efficiency.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional codes that could offer further information on the issue. Related codes may help identify if the problem is isolated or part of a broader issue. | OBD-II Scanner |
| Inspect Sensor and Wiring Visually | Visually inspect the exhaust gas temperature sensor for damage, such as cracks or wear. Examine the wiring and connectors for any signs of fraying, corrosion, or loose connections that could contribute to erratic signals. | Flashlight, Safety Gloves |
| Test for Intermittent Signal | Use a diagnostic tool to monitor the output from the exhaust gas temperature sensor for Bank 2 Sensor 4 while the engine is running. Check for irregularities or fluctuations in the readings that indicate an intermittent signal. | Diagnostic Tool, Oscilloscope |
| Check Wiring Continuity | Use a multimeter to verify the continuity of the wiring leading to the sensor. Move the wiring harness to simulate engine vibrations and see if the continuity changes, indicating an intermittent fault. | Multimeter |
| Inspect Connectors | Check the connectors for secure fitting and signs of corrosion. Clean the connectors using contact cleaner and replace them if any damage or corrosion is found, as poor connections can cause erratic sensor signals. | Contact Cleaner, Replacement Connectors |
| Replace Faulty Sensor | If the exhaust gas temperature sensor is determined to be faulty, replace it with a manufacturer-approved part. Ensure the new sensor is properly connected and installed. | Replacement Sensor, Basic Hand Tools |
| Clear Code and Test Drive | After replacing any faulty components, clear the P2477 code using an OBD-II scanner and take the vehicle for a test drive. Monitor the sensor’s performance to ensure the issue has been resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | Following the test drive, use the OBD-II scanner to verify that the P2477 code has been cleared and no new codes have appeared. If the code persists, further diagnostics may be necessary to identify the cause of the erratic signals. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)