Fix P2435: STEP-BY-STEP diagnostic GUIDE!

The P2435: Secondary Air Injection System Air Flow/Pressure Sensor Circuit Bank 2 refers to an issue within the air flow or pressure sensor circuit of the secondary air injection system for Bank 2. This may be caused by a faulty sensor, problems with the wiring, or issues with the connectors, which can affect the system’s ability to control air flow or pressure effectively.

P2435 – Quick Overview

CodeInformation
MeaningP2435: Secondary Air Injection System Air Flow/Pressure Sensor Circuit Bank 2
Is it serious?Moderate – improper functioning of this sensor may lead to inefficient emissions control and reduced engine performance.
Possible causes– Issues with the air flow/pressure sensor circuit for the secondary air injection system Bank 2
– Faulty air flow/pressure sensor
– Wiring or connector problems
How to diagnose?– Inspect and test the air flow/pressure sensor circuit for Bank 2
– Check wiring and connectors
– Replace faulty sensor if needed

P2435 Meaning

The P2435: Secondary Air Injection System Air Flow/Pressure Sensor Circuit Bank 2 code signifies that there is an issue with the circuit monitoring the air flow or pressure in the secondary air injection system for Bank 2. This could be due to problems with the sensor itself, or it might be caused by damaged wiring or faulty connectors. This sensor helps ensure proper air flow into the exhaust to reduce emissions. If the sensor malfunctions, it can cause poor air injection management, leading to elevated emissions and reduced engine efficiency.

Step-by-step diagnostic guide

ActionDescriptionTools Needed
Check for Other CodesUse an OBD-II scanner to determine if there are additional related codes that might help identify further issues or point to the root cause.OBD-II Scanner
Inspect the Air Flow/Pressure SensorVisually inspect the secondary air injection air flow/pressure sensor for Bank 2 for any signs of physical damage, such as cracks, corrosion, or loose mounting.Flashlight, Safety Gloves
Test the Sensor CircuitUse a diagnostic tool to test the output from the air flow/pressure sensor and verify that the readings are within the manufacturer’s specified range.Multimeter, Diagnostic Tool
Inspect Wiring and ConnectorsInspect all wiring and connectors leading to the sensor for damage, loose connections, or corrosion that could be affecting the circuit.Flashlight, Multimeter
Repair or Replace WiringIf any faults are found with the wiring or connectors, repair or replace them to restore proper functionality to the sensor circuit.Wiring Repair Kit, Connector Tools
Replace the Sensor if FaultyIf the sensor itself is found to be defective, replace it to restore accurate monitoring of the air flow and pressure in the secondary air injection system.Replacement Sensor, Wrench Set
Clear the Code and Test DriveAfter repairs are completed, clear the P2435 code using an OBD-II scanner and perform a test drive to confirm that the issue has been resolved.OBD-II Scanner, Vehicle Owner’s Manual
Recheck for CodesRe-scan the vehicle after the test drive to ensure that the P2435 code has not returned. If it does reappear, further diagnostic procedures may be required.OBD-II Scanner

Free PDF: How to choose OBD2 scanner

buyers guide popup

I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.

✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners

PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide. 

Just tell me where to send it.

Leave a Comment