The P2400: Evaporative Emission System Leak Detection Pump Control Circuit/Open refers to an issue where the control circuit for the leak detection pump in the evaporative emission system is either open or not functioning correctly. This can lead to problems such as increased emissions, potential failure to pass emissions tests, and inefficiencies in the vehicle’s emission control system.
P2400 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2400: Evaporative Emission System Leak Detection Pump Control Circuit/Open |
| Is it serious? | Yes, this code can lead to increased emissions and may cause the vehicle to fail an emissions test. |
| Possible causes | – Open circuit in the leak detection pump control – Faulty leak detection pump – Wiring or connector issues |
| How to diagnose? | – Inspect and test the leak detection pump control circuit – Check wiring and connectors – Replace faulty leak detection pump if necessary |
P2400 Meaning
The P2400: Evaporative Emission System Leak Detection Pump Control Circuit/Open code indicates that there is an issue with the control circuit of the leak detection pump within the vehicle’s evaporative emission system. The leak detection pump is responsible for pressurizing the system to identify any leaks that could allow fuel vapors to escape into the atmosphere. An open circuit or malfunction in this pump can prevent the system from effectively detecting leaks, leading to increased emissions and potential environmental harm.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to identify any additional related codes that might provide more context to the issue. Additional codes can help pinpoint the exact cause. | OBD-II Scanner |
| Inspect the Leak Detection Pump | Visually inspect the leak detection pump for any signs of physical damage, wear, or corrosion. Ensure that it is securely mounted and free from obstructions. | Flashlight, Visual Inspection Tools |
| Test the Leak Detection Pump Control Circuit | Use a multimeter to test the continuity and voltage in the leak detection pump control circuit. Ensure that the circuit is complete and that the pump is receiving the appropriate voltage as per manufacturer specifications. | Multimeter, Wiring Diagram |
| Check Wiring and Connectors | Inspect all wiring and connectors related to the leak detection pump for signs of damage, such as fraying, corrosion, or disconnections. Repair or replace any faulty wiring or connectors as necessary. | Multimeter, Wire Repair Tools |
| Inspect and Test the Leak Detection Pump | If the control circuit is functioning correctly, test the leak detection pump itself. Use a diagnostic tool to activate the pump and observe its operation. Replace the pump if it does not operate as expected. | Diagnostic Tool, Replacement Pump |
| Clear the Code and Test Drive | After performing the necessary repairs, clear the P2400 code using an OBD-II scanner. Take the vehicle for a test drive to ensure that the issue has been resolved and the code does not reappear. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, use the OBD-II scanner again to verify that the P2400 code has been cleared. If the code returns, further diagnosis may be required to identify and fix underlying issues. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
