The P2287: Injector Control Pressure Sensor Circuit Intermittent refers to an intermittent problem in the injector control pressure sensor circuit. This type of issue can arise due to loose or damaged wiring, a faulty sensor, or faulty connectors, leading to inconsistent pressure readings. Intermittent faults can be challenging to detect but are critical to address as they can cause erratic engine behavior and fuel injection problems.
P2287 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2287: Injector Control Pressure Sensor Circuit Intermittent |
| Is it serious? | Yes, as intermittent signals can cause inconsistent fuel pressure regulation, leading to engine performance issues, misfires, or poor fuel economy. |
| Possible causes | – Intermittent fault in sensor circuit – Loose or damaged wiring – Faulty sensor or connectors |
| How to diagnose? | – Check for intermittent issues in the sensor circuit – Inspect wiring and connectors for damage – Test the sensor for consistent operation |
P2287 Meaning
The P2287: Injector Control Pressure Sensor Circuit Intermittent code indicates that there is an unstable or inconsistent signal coming from the injector control pressure sensor. This means that the sensor’s voltage signal may intermittently drop out or spike, leading to incorrect fuel pressure readings and causing the engine to run poorly. The issue can be caused by loose wiring, poor electrical connections, or a failing sensor.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to see if there are any additional codes that might indicate related issues with the fuel system or electrical components. | OBD-II Scanner |
| Inspect Wiring and Connectors | Visually inspect the wiring and connectors to the injector control pressure sensor. Look for frayed wires, loose connections, or corrosion that could cause intermittent connectivity. | Flashlight, Safety Gloves |
| Wiggle Test for Intermittent Faults | While monitoring the sensor output with a diagnostic tool, gently wiggle the wiring harness and connectors. Observe if the signal fluctuates, indicating an intermittent connection. | Diagnostic Tool, Hand Tools |
| Test the Sensor for Consistent Operation | Use a multimeter or diagnostic tool to check the output signal from the sensor over time. Verify that the sensor is producing a stable output within the expected range. | Multimeter, Diagnostic Tool |
| Inspect Sensor Mounting and Stability | Ensure that the sensor is properly mounted, as vibrations or a loose sensor can contribute to intermittent signal problems. | Flashlight, Hand Tools |
| Inspect Sensor Circuit Voltage and Ground | Use a multimeter to measure the voltage and ground signal at the sensor connector. Check for voltage fluctuations that could indicate a faulty connection or unstable power supply. | Multimeter |
| Trace Wiring for Damaged Insulation | Trace the wiring harness back to the ECU, looking for areas where the insulation may be damaged or wires may be exposed, which could cause short circuits or signal disruptions. | Wiring Diagram, Flashlight |
| Replace Faulty Sensor or Connectors | If the sensor or connectors show signs of damage or inconsistent operation, replace the faulty components with OEM parts to ensure proper function. | Replacement Sensor, Hand Tools |
| Clear the Code and Test Drive | After completing any necessary repairs, clear the code using an OBD-II scanner. Take the vehicle for a test drive while monitoring the sensor data to ensure stable performance. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to confirm that the P2287 code has not returned. If the code reappears, further inspection of the electrical system may be needed. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)