The P2241: O2 Sensor Positive Current Control Circuit Low Bank 2 Sensor 1 refers to a situation where the oxygen (O2) sensor positive current control circuit for Bank 2 Sensor 1 is reading a voltage level that is lower than expected. This can be due to a faulty sensor, wiring problems, or connector issues. This malfunction prevents the sensor from providing accurate readings, resulting in improper adjustments to the air-fuel ratio and affecting engine efficiency.
P2241 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2241: O2 Sensor Positive Current Control Circuit Low Bank 2 Sensor 1 |
| Is it serious? | Yes, as a low voltage condition can result in improper air-fuel mixture adjustments, leading to increased emissions and poor fuel economy. |
| Possible causes | – Low voltage in O2 sensor positive current control circuit for Bank 2 Sensor 1 – Faulty O2 sensor – Wiring issues – Connector problems |
| How to diagnose? | – Measure voltage in the O2 sensor positive current control circuit for Bank 2 Sensor 1 – Test the O2 sensor for proper operation – Inspect wiring and connectors for faults |
P2241 Meaning
The P2241: O2 Sensor Positive Current Control Circuit Low Bank 2 Sensor 1 code indicates that the oxygen sensor’s positive current control circuit in Bank 2 Sensor 1 is experiencing a voltage lower than specified by the manufacturer. This low voltage may indicate issues such as a faulty sensor, broken or damaged wiring, or poor electrical connectivity, affecting the ability of the engine to properly adjust the air-fuel mixture.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to determine if there are additional codes related to the oxygen sensor or other components. This will help identify if the issue is isolated or part of a broader fault. | OBD-II Scanner |
| Measure Voltage in the O2 Sensor Positive Current Control Circuit | Use a multimeter to measure the voltage of the positive current control circuit for the O2 sensor in Bank 2 Sensor 1. Compare the voltage readings against the manufacturer’s specifications to determine if they are within the expected range. | Multimeter, Vehicle Service Manual |
| Test the O2 Sensor | Test the O2 sensor for proper operation using a diagnostic tool. If the O2 sensor is not working correctly, it may need to be replaced to restore normal function. | Multimeter, Diagnostic Tool |
| Inspect Wiring and Connectors for Faults | Inspect all wiring and connectors associated with the O2 sensor for Bank 2 Sensor 1. Look for visible signs of damage, such as frayed wires, loose connections, or corrosion that could be causing a low voltage reading. Repair or replace any damaged components. | Flashlight, Safety Gloves |
| Check Sensor Connector Condition | Examine the sensor connector to ensure there are no bent or damaged pins and that the connector is securely attached. Poor connections can lead to low voltage in the circuit. | Flashlight |
| Clear the Code and Test Drive | After completing any necessary repairs, use an OBD-II scanner to clear the fault code. Conduct a test drive to verify that the sensor readings are stable and that the fault does not return. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to confirm that the P2241 code has not reappeared. If the issue persists, further diagnostic steps will be required. | OBD-II Scanner |
Popular OBD2 guides
See all guides
Best OBD2 scanners in 2025
I constantly test new OBD-II scanners to give you the best options possible. Here is a full list of the best tools in all categories currently.
