The P2219: NOx Sensor Heater Control Circuit Low Bank 2 refers to a condition where the voltage in the NOx sensor heater control circuit of bank 2 is lower than expected. This can be caused by a faulty NOx sensor heater, wiring issues, or connector problems, leading to insufficient power for the heater to operate properly.
P2219 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2219: NOx Sensor Heater Control Circuit Low Bank 2 |
| Is it serious? | Yes, low voltage can prevent the NOx sensor from heating up correctly, leading to inaccurate NOx readings and poor emissions control. |
| Possible causes | – Low voltage in NOx sensor heater control circuit in bank 2 – Faulty NOx sensor heater or wiring issues – Connector problems |
| How to diagnose? | – Measure voltage in the NOx sensor heater control circuit in bank 2 – Test the NOx sensor heater for faults – Inspect wiring and connectors for issues |
P2219 Meaning
The P2219: NOx Sensor Heater Control Circuit Low Bank 2 code indicates that the engine control module (ECM) has detected lower-than-expected voltage in the NOx sensor heater control circuit for bank 2 (the side of the engine that does not contain cylinder 1). The NOx sensor heater helps bring the sensor to its operating temperature to accurately measure nitrogen oxide (NOx) emissions. If the voltage is too low, the heater may not function properly, leading to inaccurate NOx readings and poor engine performance.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional related codes that could provide further insight into the NOx sensor heater control issue. | OBD-II Scanner |
| Measure Voltage in NOx Sensor Heater Control Circuit | Use a multimeter to measure the voltage in the NOx sensor heater control circuit in bank 2. Verify that the voltage falls within the manufacturer’s specifications. | Multimeter, Vehicle Manual |
| Test the NOx Sensor Heater | Use a diagnostic tool or multimeter to test the NOx sensor heater in bank 2 for proper operation. Ensure that the heater is functioning correctly and reaching operating temperature. | Multimeter, Diagnostic Tool |
| Inspect Wiring and Connectors | Visually inspect the wiring and connectors leading to the NOx sensor in bank 2. Look for damaged wires, loose connections, or corroded terminals that could cause low voltage. | Flashlight, Safety Gloves |
| Test Circuit Continuity | Check for continuity in the NOx sensor heater control circuit to ensure proper current flow. Low voltage could result from resistance in the circuit or a poor connection. | Multimeter, Wiring Diagram |
| Repair or Replace Faulty Components | If any faulty wiring, connectors, or the NOx sensor heater itself is found, repair or replace them as necessary to restore proper voltage and heater functionality. | Replacement Parts, Tools |
| Clear the Code and Test Drive | After repairs, clear the P2219 code using an OBD-II scanner and take the vehicle for a test drive to ensure the issue is resolved. | OBD-II Scanner |
| Recheck for Codes | After the test drive, re-scan the vehicle to confirm that the P2219 code does not return. | OBD-II Scanner |
Popular OBD2 guides
See all guides
Best OBD2 scanners in 2025
I constantly test new OBD-II scanners to give you the best options possible. Here is a full list of the best tools in all categories currently.
