The P2023: Intake Manifold Runner Position Sensor/Switch Circuit Intermittent Bank 2 refers to a situation where the signal from the intake manifold runner position sensor or switch in Bank 2 is intermittent or unstable. This issue can be caused by a faulty sensor, switch, or wiring problems that result in inconsistent signals.
P2023 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2023: Intake Manifold Runner Position Sensor/Switch Circuit Intermittent Bank 2 |
| Is it serious? | Yes, intermittent sensor signals can affect airflow control, leading to poor engine performance and reduced fuel efficiency. |
| Possible causes | – Intermittent sensor or switch signal – Faulty position sensor or switch – Wiring or connector issues |
| How to diagnose? | – Monitor the sensor or switch signal for intermittency – Test the sensor or switch – Inspect wiring and connectors |
P2023 Meaning
The P2023: Intake Manifold Runner Position Sensor/Switch Circuit Intermittent Bank 2 code indicates that the signal from the intake manifold runner position sensor or switch in Bank 2 is inconsistent or intermittent. This sensor monitors the position of the intake manifold runners, which control airflow into the engine. Inconsistent signals can lead to improper airflow management, resulting in reduced performance, poor fuel efficiency, and drivability issues.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for any additional codes related to the intake manifold runner system or other engine components. These may help in diagnosing the issue. | OBD-II Scanner |
| Monitor Sensor Signal for Intermittency | Use a diagnostic tool or oscilloscope to monitor the signal from the intake manifold runner position sensor or switch on Bank 2. Look for erratic or intermittent signals that indicate improper operation. | Oscilloscope, Diagnostic Tool |
| Test the Position Sensor or Switch | Test the intake manifold runner position sensor or switch to ensure it is functioning correctly. If the sensor or switch is providing unstable signals, it may need to be replaced. | Multimeter, Diagnostic Tool |
| Inspect Wiring and Connectors | Visually inspect the wiring and connectors leading to the intake manifold runner position sensor or switch. Look for signs of damage, corrosion, or loose connections that may cause intermittent signals. | Flashlight, Multimeter |
| Test Circuit Continuity | Perform a continuity test on the wiring circuit to check for loose connections, shorts, or breaks that could lead to intermittent signal issues. | Multimeter |
| Inspect the Intake Manifold Runners | Check the intake manifold runners for any signs of blockage or damage that could affect the sensor’s ability to detect the correct position. Ensure the runners move freely without restriction. | Flashlight, Intake Cleaner |
| Repair or Replace Damaged Components | Repair or replace any damaged wiring, connectors, or faulty sensors to ensure a consistent and stable signal from the intake manifold runner position sensor. | Wiring Repair Kit, Multimeter |
| Clear the Code and Test Drive | After completing repairs, clear the P2023 code using an OBD-II scanner. Take the vehicle for a test drive to ensure that the issue has been resolved and the sensor is working properly. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to confirm that the P2023 code has not returned. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)