The P2020: Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2 refers to an issue where the position sensor or switch in the intake manifold runner system on Bank 2 is not performing within its expected range. This can be due to a faulty sensor, incorrect readings, or wiring problems.
P2020 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2020: Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2 |
| Is it serious? | Yes, this can lead to poor engine performance, reduced fuel efficiency, and possible engine management issues. |
| Possible causes | – Faulty position sensor or switch – Incorrect sensor readings – Wiring or connector issues |
| How to diagnose? | – Test the position sensor or switch for range and performance – Inspect wiring and connectors – Check for sensor calibration issues |
P2020 Meaning
The P2020: Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2 code indicates that the intake manifold runner position sensor or switch on Bank 2 is not providing readings within the manufacturer’s specified range. The intake manifold runner system adjusts airflow into the engine to optimize performance and fuel efficiency. If the sensor or switch is malfunctioning, it can lead to improper air/fuel mixture and poor engine performance.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional codes related to the intake manifold runner system or engine control unit. These codes can help narrow down the issue. | OBD-II Scanner |
| Test the Position Sensor or Switch | Use a multimeter or diagnostic tool to test the intake manifold runner position sensor or switch on Bank 2. Verify that the readings are within the manufacturer’s specified range. | Multimeter, Diagnostic Tool |
| Inspect Wiring and Connectors | Visually inspect the wiring and connectors for the intake manifold runner system. Look for any signs of damage, corrosion, or disconnection that could cause incorrect readings. | Flashlight, Multimeter |
| Check for Calibration Issues | Verify the sensor or switch calibration using the diagnostic tool. Incorrect calibration can result in incorrect sensor readings, causing the P2020 code. | Diagnostic Tool |
| Test Circuit Continuity | Perform a continuity test on the wiring to ensure there are no shorts, open circuits, or high resistance affecting the sensor’s performance. | Multimeter |
| Check the Intake Manifold Runner System | Inspect the intake manifold runner system to ensure it is functioning mechanically and that the runners can open and close without obstruction. | Flashlight, Intake Cleaner |
| Repair or Replace Damaged Components | Repair or replace any faulty sensors, switches, wiring, or connectors to restore proper circuit performance. | Wiring Repair Kit, Multimeter |
| Clear the Code and Test Drive | After making repairs or adjustments, clear the P2020 code using an OBD-II scanner and take the vehicle for a test drive to ensure that the problem has been resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to verify that the P2020 code has not returned. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
