The P0C03: Drive Motor “B” Current Low fault code indicates that the current being detected from Drive Motor “B” is lower than expected. This issue may be caused by a faulty current sensor, problems in the electrical system, or the motor itself. Low current readings can reduce motor efficiency and, if not addressed, may cause further damage to the drive motor.
P0C03 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P0C03: Drive Motor “B” Current Low |
| Is it serious? | Yes, low current readings can reduce motor efficiency and cause damage. |
| Possible causes | – Low current reading from the motor – Faulty current sensor – Electrical system issues |
| How to diagnose? | – Measure the current from the drive motor – Test the current sensor – Inspect the electrical system for faults |
P0C03 Meaning
The P0C03 code indicates that the current sensor for Drive Motor “B” is reporting lower than normal current levels. The current sensor monitors the electrical current flowing through the motor to ensure it operates efficiently. A low reading could be due to a faulty sensor, problems in the wiring, or issues with the electrical system, and may result in reduced motor performance or damage if not resolved.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional related codes that might provide further insight into the issue. | OBD-II Scanner |
| Measure the Current from Drive Motor “B” | Use a multimeter or diagnostic tool to measure the current output from Drive Motor “B.” Compare the readings with manufacturer specifications to ensure they are within the correct range. | Multimeter, Diagnostic Tool |
| Test the Current Sensor | Test the current sensor to ensure it is functioning properly and providing accurate readings. | Multimeter, Diagnostic Tool |
| Inspect the Electrical System | Inspect the vehicle’s electrical system for faults such as poor grounding, low voltage, or wiring issues that may affect the sensor’s performance. | Multimeter, Flashlight, Safety Gloves |
| Inspect Wiring and Connections | Visually inspect the wiring and connectors leading to the drive motor and current sensor for signs of damage, corrosion, or loose connections that could be contributing to the low current readings. | Flashlight, Multimeter, Wiring Diagram |
| Clear the Code and Test Drive | After completing repairs, clear the fault code using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the system to ensure that the P0C03 code does not return. | OBD-II Scanner |
Popular OBD2 guides
See all guides
Best OBD2 scanners in 2025
I constantly test new OBD-II scanners to give you the best options possible. Here is a full list of the best tools in all categories currently.
