The P0A8D: 14 Volt Power Module System Voltage Low fault code indicates that the system voltage in the 14-volt power module is lower than expected. This issue may arise from a faulty power module, insufficient voltage supply, or issues with the voltage regulation components.
P0A8D – Quick Overview
Code | Information |
---|---|
Meaning | P0A8D: 14 Volt Power Module System Voltage Low |
Is it serious? | Yes, low system voltage can lead to improper power distribution, affecting the vehicle’s electrical systems and potentially causing performance issues. |
Possible causes | – Low system voltage – Faulty power module – Voltage supply issue |
How to diagnose? | – Measure system voltage – Test power module functionality – Inspect voltage supply components |
P0A8D Meaning
The P0A8D: 14 Volt Power Module System Voltage Low code indicates that the voltage provided by the 14-volt power module is below the required levels. This can lead to improper operation of various electrical components, such as the vehicle’s charging system or control modules. The issue could be caused by a faulty power module, voltage supply problems, or other issues in the voltage regulation system.
Step-by-step diagnostic guide
Action | Description | Tools Needed |
---|---|---|
Check for Other Codes | Use an OBD-II scanner to check for any related fault codes that might provide further insights into the power module or voltage supply. | OBD-II Scanner |
Measure System Voltage | Use a multimeter to measure the voltage output from the 14-volt power module. Compare the readings to manufacturer specifications to ensure the voltage is within acceptable ranges. | Multimeter |
Test Power Module Functionality | Perform a functional test on the 14-volt power module to verify that it is delivering the proper voltage. Look for signs of internal failure, such as insufficient output or overheating. | Diagnostic Tool, Multimeter |
Inspect Voltage Supply Components | Check the components responsible for supplying power to the module, such as alternators, voltage regulators, and connections. Ensure there is no voltage drop or supply failure. | Flashlight, Multimeter |
Inspect Wiring and Connections | Visually inspect the wiring and connectors between the power module and other components. Look for loose, corroded, or damaged connections that could cause a voltage drop. | Flashlight, Multimeter |
Test Grounding and Power Supply | Ensure that the power module and related components are properly grounded and that they receive a stable power supply. Poor grounding can cause voltage irregularities. | Multimeter |
Replace Faulty Components | If the power module, voltage supply, or wiring is found to be defective, replace the necessary components to restore proper voltage levels. | Replacement Parts as Needed |
Clear the Code and Test Drive | After completing repairs, clear the fault code using an OBD-II scanner and take the vehicle for a test drive to confirm that the issue is resolved. | OBD-II Scanner |
Recheck for Codes | After the test drive, re-scan the vehicle to ensure the P0A8D code does not return. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner

I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.

Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)