The P0913: Gate Select Actuator Circuit High refers to a condition where the gate select actuator circuit is experiencing higher-than-expected voltage. This can prevent the actuator from functioning correctly, leading to issues with gear selection and transmission performance.
P0913 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P0913: Gate Select Actuator Circuit High |
| Is it serious? | Yes, high voltage in the gate select actuator circuit can result in improper gear selection and affect drivability. |
| Possible causes | – High voltage in the gate select actuator circuit – Faulty gate select actuator – Wiring or connector issues |
| How to diagnose? | – Check the circuit for high voltage – Inspect wiring and connectors – Replace the gate select actuator if necessary |
P0913 Meaning
The P0913 code indicates that the gate select actuator circuit is receiving higher-than-expected voltage, which could be caused by faulty wiring, a bad connection, or a malfunctioning actuator. High voltage can cause the actuator to perform incorrectly, resulting in improper or delayed gear shifts.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for any additional codes that might offer more information about the issue. | OBD-II Scanner |
| Inspect Wiring and Connectors | Visually inspect the wiring and connectors in the gate select actuator circuit for damage, corrosion, or loose connections. | Flashlight, Multimeter |
| Check the Circuit for High Voltage | Use a multimeter to measure the voltage in the gate select actuator circuit and compare the readings to manufacturer specifications. | Multimeter, Vehicle Manual |
| Test the Gate Select Actuator | Test the gate select actuator for proper operation to ensure it is functioning correctly. Replace it if the actuator is faulty or affected by the high voltage. | Multimeter, Diagnostic Tool |
| Replace Faulty Components | Replace any damaged wiring, connectors, or the gate select actuator if necessary. | Replacement parts, Tools |
| Clear Code and Test Drive | After repairs, clear the code and take the vehicle for a test drive to confirm that the issue is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | Re-scan the vehicle after the test drive to ensure that the P0913 code does not return. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko