The P069C: Cylinder 10 Glow Plug Control Circuit Low code indicates that the control module has detected a low voltage condition in the glow plug control circuit for cylinder 10. This low voltage can prevent the glow plug from heating up properly, resulting in difficulty starting the engine, particularly in cold weather. Common causes include a faulty glow plug, wiring issues, or a malfunction in the control circuit.
P069C – Quick Overview
| Code | Information |
|---|---|
| Meaning | P069C: Cylinder 10 Glow Plug Control Circuit Low |
| Is it serious? | Yes, as it can lead to hard engine starting, particularly in cold weather. |
| Possible causes | – Low voltage in the cylinder 10 glow plug control circuit – Faulty glow plug – Wiring issue |
| How to diagnose? | – Test cylinder 10 glow plug control circuit for voltage – Inspect wiring and connectors – Replace glow plug if necessary |
P069C Meaning
The P069C code indicates that the control module has detected a lower-than-expected voltage in the glow plug control circuit for cylinder 10. This low voltage can prevent the glow plug from reaching its necessary temperature, making it difficult for the engine to start, especially in cold conditions.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional related codes, especially those affecting the glow plug system or electrical circuits. | OBD-II Scanner |
| Test the Cylinder 10 Glow Plug Control Circuit for Voltage | Use a multimeter to measure the voltage in the glow plug control circuit for cylinder 10. Compare the readings with the manufacturer’s specifications to verify proper voltage levels. | Multimeter |
| Inspect Wiring and Connectors | Inspect the wiring and connectors leading to cylinder 10’s glow plug for signs of damage, loose connections, or corrosion that could cause low voltage. | Flashlight, Multimeter |
| Test the Glow Plug for Cylinder 10 | Test the glow plug in cylinder 10 to ensure it is functioning correctly and heating properly. Replace the glow plug if it is faulty. | Diagnostic Tool, Multimeter |
| Replace the Glow Plug if Necessary | If the glow plug for cylinder 10 is faulty, replace it to restore proper engine starting performance, especially in cold conditions. | Replacement Glow Plug, Tools |
| Clear the Code and Test | After repairs, clear the code using an OBD-II scanner and test the vehicle to ensure the cylinder 10 glow plug control circuit is functioning correctly. | OBD-II Scanner, Vehicle Manual |
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko