The P0664: Intake Manifold Tuning Valve Control Circuit Low Bank 2 code indicates that there is a low voltage issue in the control circuit for the intake manifold tuning valve on Bank 2. This could be caused by wiring problems, a malfunctioning valve, or a faulty control circuit. Low voltage in this circuit can impair the tuning valve’s ability to optimize airflow, leading to reduced engine performance and efficiency.
P0664 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P0664: Intake Manifold Tuning Valve Control Circuit Low Bank 2 |
| Is it serious? | Yes, as it can impact engine performance and fuel efficiency. |
| Possible causes | – Low voltage in the control circuit for the intake manifold tuning valve (Bank 2) – Faulty valve – Wiring issue |
| How to diagnose? | – Test intake manifold tuning valve control circuit for Bank 2 for voltage – Inspect wiring and connectors – Replace valve if necessary |
P0664 Meaning
The P0664 code indicates that the control module has detected a low voltage condition in the intake manifold tuning valve control circuit for Bank 2. The intake manifold tuning valve adjusts airflow to optimize engine performance. A low voltage condition can prevent the valve from working correctly, leading to poor throttle response and lower efficiency.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for any additional codes related to airflow or engine control, which may help in further diagnosing the issue. | OBD-II Scanner |
| Test the Intake Manifold Tuning Valve Control Circuit for Bank 2 | Use a multimeter to measure the voltage in the control circuit for the intake manifold tuning valve on Bank 2. Ensure it meets the manufacturer’s specified voltage range. | Multimeter |
| Inspect Wiring and Connectors | Inspect the wiring and connectors leading to the intake manifold tuning valve for damage, loose connections, or corrosion that could result in low voltage. | Flashlight, Multimeter |
| Test the Tuning Valve Actuator | Test the tuning valve actuator to ensure it is receiving proper voltage and is operating correctly. Replace if faulty. | Diagnostic Tool, Multimeter |
| Replace the Tuning Valve if Necessary | If the intake manifold tuning valve on Bank 2 is faulty or underperforming, replace it to restore optimal airflow control and engine performance. | Replacement Valve, Tools |
| Clear the Code and Test | After repairs, clear the code using an OBD-II scanner and test the vehicle to ensure the intake manifold tuning valve control circuit is functioning properly. | OBD-II Scanner, Vehicle Manual |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko