The P051D: Crankcase Pressure Sensor Circuit High refers to an issue where the crankcase pressure sensor is detecting a higher-than-expected voltage. This can interfere with the sensor’s ability to accurately monitor crankcase pressure, potentially leading to improper engine performance and increased wear.
P051D – Quick Overview
| Code | Information |
|---|---|
| Meaning | P051D: Crankcase Pressure Sensor Circuit High |
| Is it serious? | Yes, it can lead to inaccurate pressure readings, causing engine performance issues or long-term damage. |
| Possible causes | – Faulty crankcase pressure sensor – High voltage supply – Wiring issues |
| How to diagnose? | – Test the crankcase pressure sensor for high input – Verify voltage supply to the sensor – Inspect wiring for shorts or damage |
P051D Meaning
The P051D: Crankcase Pressure Sensor Circuit High code is triggered when the engine control module (ECM) detects that the crankcase pressure sensor is receiving or reporting a voltage higher than expected. This can lead to improper monitoring of crankcase pressure, potentially resulting in poor engine performance, oil leaks, or other engine issues.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for other related fault codes that may provide additional insight into the issue. | OBD-II Scanner |
| Inspect the Crankcase Pressure Sensor | Visually inspect the sensor for signs of damage, improper installation, or wiring issues. | Flashlight, Safety Gloves |
| Test the Crankcase Pressure Sensor for High Input | Use a multimeter to check the sensor’s voltage output and determine if it is reading too high. | Multimeter, Diagnostic Tool |
| Verify Voltage Supply to the Sensor | Measure the voltage supply to ensure the sensor is receiving the proper voltage from the vehicle’s electrical system. | Multimeter |
| Inspect Wiring for Shorts or Damage | Check the wiring and connectors for any signs of shorts, damage, or corrosion that may cause high voltage readings. | Flashlight, Multimeter |
| Clear the Code and Test Drive | After repairs, clear the code with an OBD-II scanner and test drive the vehicle to confirm that the issue is resolved. | OBD-II Scanner, Vehicle Manual |
| Recheck for Codes | Re-scan the vehicle after the test drive to ensure that the P051D code hasn’t returned. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko