The P0468: Purge Flow Sensor Circuit High Input refers to an issue where the purge flow sensor is sending or receiving a higher-than-expected signal. This could be caused by a faulty purge flow sensor, high voltage supply, or wiring issues such as shorts. The purge flow sensor is a critical part of the EVAP (Evaporative Emission Control) system, helping manage the flow of fuel vapors to the engine. A malfunction in this sensor can lead to inaccurate vapor management and increased emissions.
P0468 – Quick Overview
| Meaning | P0468: Purge Flow Sensor Circuit High Input |
| Is it serious? | Yes, this code can cause the EVAP system to malfunction, leading to increased emissions and possible engine performance issues. |
| Possible causes | – Faulty purge flow sensor – High voltage supply – Wiring issues |
| How to diagnose? | – Test the purge flow sensor for high input – Verify voltage supply to the sensor – Inspect wiring for shorts or damage |
P0468 Meaning
The P0468: Purge Flow Sensor Circuit High Input indicates that the circuit controlling the purge flow sensor is receiving or sending a higher-than-expected signal. This issue can stem from a faulty sensor, an excessive voltage supply, or a wiring issue such as a short. The purge flow sensor plays an important role in the EVAP system, regulating fuel vapor flow to the engine. A malfunction can lead to incorrect vapor management, resulting in higher emissions.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for any additional related codes that might help with the diagnosis. | OBD-II Scanner |
| Inspect the Purge Flow Sensor | Visually inspect the purge flow sensor for signs of damage, corrosion, or loose connections. Ensure the sensor is securely mounted and connected. | Flashlight, Safety Gloves |
| Test the Purge Flow Sensor | Use a multimeter to test the purge flow sensor for high input. Compare the readings with the manufacturer’s specifications. Replace if necessary. | Multimeter, Manufacturer’s Specifications |
| Verify Voltage Supply | Check the voltage supply to the purge flow sensor to ensure it is within the proper range. | Multimeter |
| Inspect Wiring and Connectors | Inspect the wiring and connectors for shorts, damage, or loose connections. Perform a continuity check and repair any damaged wires. | Flashlight, Multimeter |
| Repair or Replace Wiring/Connectors | If any wiring or connectors are found to be shorted or damaged, repair or replace them. Ensure all connections are secure and clean. | Wire Strippers, Electrical Tape, Replacement Wires/Connectors |
| Clear the Code and Test Drive | After completing repairs, clear the P0468 code using an OBD-II scanner and take the vehicle for a test drive to ensure the issue is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | Re-scan the vehicle to ensure the P0468 code does not return after the test drive. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko