The P0467: Purge Flow Sensor Circuit Low Input refers to an issue where the purge flow sensor is receiving or sending a lower-than-expected signal. This problem may be caused by a faulty purge flow sensor, low voltage supply, or wiring issues. The purge flow sensor plays an important role in the EVAP (Evaporative Emission Control) system by monitoring the flow of fuel vapors to the engine. A malfunction in this sensor can lead to inaccurate vapor management and increased emissions.
P0467 – Quick Overview
| Meaning | P0467: Purge Flow Sensor Circuit Low Input |
| Is it serious? | Yes, this code can affect the EVAP system’s ability to manage fuel vapors correctly, leading to higher emissions and potential performance issues. |
| Possible causes | – Faulty purge flow sensor – Low voltage supply – Wiring issues |
| How to diagnose? | – Test the purge flow sensor for low input – Check voltage supply to the sensor – Inspect wiring for faults |
P0467 Meaning
The P0467: Purge Flow Sensor Circuit Low Input means that the circuit responsible for controlling the purge flow sensor is reporting a lower-than-expected input. This could be caused by a malfunctioning purge flow sensor, a problem with the voltage supply, or damaged wiring. The purge flow sensor helps regulate the flow of fuel vapors into the engine for combustion. If the input signal is too low, the EVAP system may not function properly, leading to increased emissions.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional related codes that could provide further diagnostic clues. | OBD-II Scanner |
| Inspect the Purge Flow Sensor | Visually inspect the purge flow sensor for signs of damage, corrosion, or loose connections. Ensure it is securely connected and free of debris. | Flashlight, Safety Gloves |
| Test the Purge Flow Sensor | Use a multimeter to test the purge flow sensor for low input. Compare the readings with the manufacturer’s specifications. | Multimeter, Manufacturer’s Specifications |
| Check Voltage Supply | Verify the voltage supply to the purge flow sensor to ensure it is within the proper range. | Multimeter |
| Inspect Wiring and Connectors | Inspect the wiring and connectors for any signs of damage, corrosion, or loose connections. Test for continuity and repair as needed. | Flashlight, Multimeter |
| Repair or Replace Wiring/Connectors | If any wiring or connectors are found to be faulty, repair or replace them. Ensure all connections are clean, secure, and corrosion-free. | Wire Strippers, Electrical Tape, Replacement Wires/Connectors |
| Clear the Code and Test Drive | After repairs are completed, clear the P0467 code using an OBD-II scanner and take the vehicle for a test drive to confirm the issue is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | Re-scan the vehicle to ensure the P0467 code does not return after the test drive. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko