The P037E: Glow Plug Sense Circuit Low code indicates that the engine control module (ECM) has detected a lower-than-expected signal from the glow plug sense circuit. The glow plug system helps warm the combustion chambers in a diesel engine, especially during cold starts. A low signal can lead to improper glow plug operation, making the engine difficult to start.
P037E – Quick Overview
| Meaning | P037E: Glow Plug Sense Circuit Low |
| Is it serious? | Yes, this code can result in poor starting performance, particularly in cold weather, and may prevent the engine from starting effectively. |
| Possible causes | – Faulty glow plug sensor – Low signal input – Wiring or connection issues |
| How to diagnose? | – Test the glow plug sensor signal – Inspect and repair wiring and connections – Replace the sensor if necessary |
P037E Meaning
The P037E: Glow Plug Sense Circuit Low code means that the ECM is detecting a low signal from the glow plug sense circuit. This signal is crucial for monitoring the function of the glow plugs, which help the engine start properly by heating the air in the cylinders. A low signal can affect glow plug operation, causing starting difficulties, especially in cold conditions.
Step-by-step diagnostic guide
Follow these steps to diagnose and resolve the P037E code by addressing potential causes one by one.
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional related codes, especially codes tied to the glow plug system. | OBD-II Scanner |
| Test the Glow Plug Sensor Signal | Use a multimeter to test the glow plug sensor and verify the signal output. Compare the signal reading to the manufacturer’s specifications to determine if it is within the proper range. | Multimeter, Manufacturer’s Specifications |
| Inspect and Repair Wiring and Connections | Check the wiring and connectors for signs of damage, corrosion, or loose connections. Repair or replace any faulty wiring or connectors that may be causing the low signal. | Flashlight, Wiring Repair Kit |
| Replace the Glow Plug Sensor if Necessary | If the sensor is faulty or producing a low signal, replace it with a new one to restore proper glow plug functionality. | Replacement Glow Plug Sensor, Safety Gloves |
| Clear the Code and Test Drive | After making repairs, clear the P037E code using an OBD-II scanner. Test drive the vehicle to ensure the problem is resolved and the glow plug system is operating correctly. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to confirm that the P037E code has not returned. If the code reappears, further diagnosis may be needed. | OBD-II Scanner |
This diagnostic guide will help you resolve the P037E code, ensuring that the glow plug sense circuit provides the correct signal for proper glow plug operation, especially during cold starts, to improve engine performance.
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko