The P0227: Throttle/Pedal Position Sensor/Switch C Circuit Low Input indicates a problem with low voltage in the throttle or pedal position sensor C circuit. This issue can lead to improper throttle response and reduced engine performance. The problem could be due to low voltage in the circuit, a faulty sensor, wiring or connector issues, or a malfunction in the Powertrain Control Module (PCM). When this code appears, it signals that the voltage in the sensor circuit is lower than expected, which can affect the vehicle’s throttle control.
P0227 – Quick Overview
| Meaning | P0227: Throttle/Pedal Position Sensor/Switch C Circuit Low Input |
| Is it serious? | Yes, this code can be serious as it may cause poor throttle response and affect drivability, potentially leading to unsafe driving conditions. Immediate diagnosis is recommended. |
| Possible causes | – Low voltage in the throttle/pedal position sensor C circuit – Faulty throttle/pedal position sensor C – Wiring or connector issues – Faulty PCM |
| How to diagnose? | – Measure the voltage in the throttle/pedal position sensor C circuit. – Inspect the sensor for proper operation. – Check wiring and connectors for defects. – Replace or repair any faulty components. |
P0227 Meaning
The P0227: Throttle/Pedal Position Sensor/Switch C Circuit Low Input code means that the vehicle’s computer has detected a lower-than-expected voltage in the throttle or pedal position sensor C circuit. This could be due to a faulty sensor, low voltage in the circuit, or problems with the wiring or connectors. When this code is triggered, it indicates that the sensor is not receiving sufficient voltage to operate correctly, which can lead to poor throttle response and affect the vehicle’s drivability.
Step-by-step diagnostic guide
Follow the outlined procedure to diagnose this DTC by eliminating possible causes one by one.
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check if there are any other related codes present. These might provide additional clues about the problem. | OBD-II Scanner |
| Measure Voltage in Sensor Circuit | Measure the voltage in the throttle/pedal position sensor C circuit to ensure it meets the manufacturer’s specifications. | Multimeter, Manufacturer’s Specifications |
| Inspect Throttle/Pedal Position Sensor C | Inspect the sensor for signs of malfunction or low output. Ensure it is operating correctly according to manufacturer specifications. | Multimeter, Manufacturer’s Specifications |
| Check Wiring and Connectors | Inspect the wiring and connectors associated with the sensor C for any signs of wear, corrosion, or damage that could cause low voltage. | Flashlight, Multimeter |
| Inspect the PCM | If no issues are found with the sensor or wiring, inspect the Powertrain Control Module for faults or connectivity issues. Reprogram or replace if necessary. | OBD-II Scanner, Multimeter |
| Repair or Replace Faulty Components | If any faulty components are identified during the inspection, repair or replace them to restore proper function. | Replacement Parts, Basic Hand Tools |
| Clear the Code and Test Drive | After completing repairs, clear the P0227 code using the OBD-II scanner and take the vehicle for a test drive to ensure the issue is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to ensure the P0227 code has not reappeared. If the code returns, further diagnosis may be required. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko