The P00AD: Intake Air Temperature Sensor 1 Circuit High Bank 2 refers to an issue where the voltage in the intake air temperature sensor 1 circuit on Bank 2 is higher than expected. This problem can be caused by high voltage in the circuit, a faulty intake air temperature sensor, wiring issues such as shorts or opens, or a malfunctioning Powertrain Control Module (PCM).
P00AD – Quick Overview
| Meaning | P00AD: Intake Air Temperature Sensor 1 Circuit High Bank 2 |
| Is it serious? | Yes, this code can be serious as it may affect the engine’s ability to manage the air-fuel mixture properly, leading to poor performance and reduced fuel efficiency. |
| Possible causes | – High voltage in the intake air temperature sensor circuit – Faulty intake air temperature sensor – Wiring issues such as shorts or opens – Faulty PCM |
| How to diagnose? | – Test the intake air temperature sensor for proper operation. – Check for high voltage in the sensor circuit. – Inspect the wiring and connectors for defects. – Replace or repair any faulty components. |
P00AD Meaning
The P00AD: Intake Air Temperature Sensor 1 Circuit High Bank 2 code indicates that there is an excessive voltage issue within the circuit of the intake air temperature sensor on Bank 2. This could be due to over-voltage, a defective sensor, or problems with the wiring or connectors. When the sensor circuit is receiving too much voltage, it can lead to inaccurate air temperature readings, which might affect engine performance and fuel efficiency.
Step-by-step diagnostic guide
Follow the outline procedure to diagnose this DTC by eliminating possible causes one by one.
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check if there are any other related codes present. These might provide additional clues about the problem. | OBD-II Scanner |
| Test the Intake Air Temperature Sensor | Test the intake air temperature sensor on Bank 2 for proper operation, ensuring it functions according to the manufacturer’s specifications. | Multimeter, Manufacturer’s Specifications |
| Check for High Voltage in the Sensor Circuit | Measure the voltage in the intake air temperature sensor circuit to ensure it is not exceeding the expected range. | Multimeter, Manufacturer’s Specifications |
| Inspect Wiring and Connectors | Inspect the wiring and connectors leading to the intake air temperature sensor for any signs of wear, shorts, opens, or corrosion. | Flashlight, Multimeter |
| Repair or Replace Faulty Components | If any components, wiring, or the sensor are found to be faulty, repair or replace them as necessary. Ensure all connections are secure and free from corrosion. | Wire Strippers, Electrical Tape, Replacement Wires/Connectors, Replacement Sensor |
| Clear the Code and Test Drive | After completing the necessary repairs, clear the P00AD code using the OBD-II scanner. Take the vehicle for a test drive to ensure the issue is resolved and the code does not return. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to ensure the P00AD code has not reappeared. If the code returns, further diagnosis may be required. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko