Fix P0044: Mechanic’s solutions that WORKED

Triggered by a high voltage condition in the heater control circuit, the code P0044: HO2S Heater Control Circuit High (Bank 1 Sensor 3) points to an issue with the oxygen sensor in Bank 1 Sensor 3. This can lead to inefficient combustion and increased emissions, often caused by a short circuit, a faulty sensor heater, or ECM problems.

The oxygen sensor’s heater control circuit has a high voltage condition.

P0044 quick overview

Meaning	P0044: HO2S Heater Control Circuit High (Bank 1 Sensor 3)
Is it serious?	Yes, similar to P0043, it can impact the sensor’s function and engine performance.
Possible causes	– Short to ground in the heater circuit wiring – Faulty oxygen sensor heater – Poor electrical connection in the heater circuit – Faulty ECM
How to diagnose?	Scan for Codes: Confirm P0044 with an OBD-II scanner. Visual Inspection: Inspect wiring and connectors for shorts to ground. Voltage Testing: Measure the voltage in the heater circuit. Sensor Testing: Check the oxygen sensor heater resistance. ECM Testing: Evaluate ECM outputs to the heater circuit if necessary.
What is Bank 1 Sensor 3?	This is 3rd sensor from the engine to the exhaust for engine head 1. Read the full Bank1 vs Bank2 explanation.

How to fix P0044 – learn from mechanics

I looked into P0044 service cases at iatn.com website where in the private forums the mechanics seek advice from other mechanics. I usually dig up several service cases for each trouble code, but sensor 3 isn’t common and there weren’t almost any records.

However, I was able to dig up some advice coming from real mechanics by finding other cases where faults for sensor 3 were also present.

iagnostic Advice	Description of Diagnostic Step
Scan for Additional Codes	Use an OBD-II scanner to check for additional codes that might provide more insight into the underlying issue.
Visual Inspection	Inspect the oxygen sensor and its wiring for any visible signs of damage, corrosion, or disconnection.
Check for Exhaust Leaks	Inspect the exhaust system for leaks, as they can affect the oxygen sensor’s readings.
Test the Heater Circuit	Use a multimeter to test the heater circuit for continuity, shorts, and proper resistance.
Measure Sensor Voltage/Signal	Check the oxygen sensor’s output voltage or signal to ensure it’s within the expected range.
Evaluate Electrical Connections	Ensure all electrical connections related to the oxygen sensor are secure and free of corrosion.
Test the Sensor’s Response Time	Use a scan tool to monitor the oxygen sensor’s response time to changes in the fuel mixture.
Check the ECM’s Outputs	If necessary, test the Engine Control Module’s (ECM) outputs to the oxygen sensor to ensure proper communication.
Replace Faulty Components	If a faulty oxygen sensor or damaged wiring is identified, replace the necessary components.
Clear Codes and Test Drive	After repairs, clear the codes with an OBD-II scanner and take the vehicle for a test drive to ensure the issue is resolved.