The P2476: Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 4 refers to an issue where high voltage is detected in the exhaust gas temperature sensor circuit for Bank 2 Sensor 4. This condition can be caused by a malfunctioning sensor, wiring defects, or faulty connectors, leading to incorrect exhaust temperature readings and negatively impacting engine performance and emissions.
P2476 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2476: Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 4 |
| Is it serious? | Yes, this code can lead to inaccurate temperature readings, causing improper exhaust management, which may affect engine performance and emissions. |
| Possible causes | – High voltage in the exhaust gas temperature sensor circuit for Bank 2 Sensor 4 – Faulty sensor – Wiring or connector issues |
| How to diagnose? | – Measure voltage in the exhaust gas temperature sensor circuit for Bank 2 Sensor 4 – Inspect and test the sensor and wiring – Replace faulty components if needed |
P2476 Meaning
The P2476: Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 4 code signifies that the exhaust gas temperature sensor circuit for Bank 2 Sensor 4 is experiencing higher than expected voltage. This could mean the sensor is faulty or there is an issue with the circuit, such as a wiring defect or a loose connector, causing the sensor to send inaccurate data. This can lead to incorrect exhaust temperature regulation, affecting both engine efficiency and emissions.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to see if any other related codes are present. Other codes may give further insight into related issues or systems affected. | OBD-II Scanner |
| Inspect Sensor and Wiring Visually | Inspect the exhaust gas temperature sensor for visible damage, such as cracks or burn marks. Additionally, inspect the wiring and connectors for signs of wear, corrosion, or looseness. | Flashlight, Safety Gloves |
| Measure Voltage in the Sensor Circuit | Use a multimeter to measure the voltage at the exhaust gas temperature sensor for Bank 2 Sensor 4. Compare the measured voltage against manufacturer specifications to verify if the voltage is higher than expected. | Multimeter, Manufacturer’s Specifications |
| Test Sensor Performance | Utilize a diagnostic tool to evaluate the performance of the exhaust gas temperature sensor while the engine is running. Check for unusually high output signals that could indicate a sensor malfunction. | Diagnostic Tool, Multimeter |
| Check Wiring Continuity | Use a multimeter to verify continuity in the wiring to ensure there are no shorts or faults that could be causing a high voltage condition. Pay special attention to any areas where the wiring could be pinched or damaged. | Multimeter |
| Inspect Connectors | Check that all connectors are secure and free of corrosion. Clean or replace connectors if they appear damaged or corroded, as poor connections can contribute to erratic signals. | Contact Cleaner, Replacement Connectors |
| Replace Faulty Sensor | If the sensor is found to be faulty, replace it with a new one that meets manufacturer standards. Ensure the new sensor is installed securely and properly connected. | Replacement Sensor, Basic Hand Tools |
| Clear Code and Test Drive | Clear the P2476 code using an OBD-II scanner, and take the vehicle for a test drive. Monitor sensor readings to ensure the voltage levels are back to normal and the issue has been resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, rescan the vehicle using the OBD-II scanner to verify that the P2476 code has been cleared and no new codes have emerged. If the code persists, further diagnostics will be required. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)