The P0BD9: Drive Motor Inverter Temperature Sensor “D” Circuit High fault code indicates that the voltage reading from the drive motor inverter temperature sensor “D” is higher than expected. This issue may be caused by a faulty sensor, wiring problems, or an electrical system fault, leading to incorrect temperature readings and potential overheating of the drive motor inverter.
P0BD9 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P0BD9: Drive Motor Inverter Temperature Sensor “D” Circuit High |
| Is it serious? | Yes, high voltage readings can result in incorrect temperature monitoring, which could cause the drive motor inverter to overheat. |
| Possible causes | – High voltage reading from sensor “D” – Faulty sensor or wiring issue – Electrical system problem |
| How to diagnose? | – Measure voltage from sensor “D” – Test sensor functionality – Inspect electrical system |
P0BD9 Meaning
The P0BD9 code indicates that the voltage output from the drive motor inverter temperature sensor “D” is higher than expected. High voltage readings may lead to improper temperature monitoring, potentially causing the drive motor inverter to overheat.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for other related fault codes that may provide additional context on the issue. | OBD-II Scanner |
| Measure Voltage from Sensor “D” | Use a multimeter to measure the voltage output from temperature sensor “D”. Compare the readings with the manufacturer’s specifications to verify the voltage is within the correct range. | Multimeter |
| Test Sensor Functionality | Test the functionality of sensor “D” to ensure it is working correctly. A faulty sensor may produce high voltage readings, leading to incorrect temperature monitoring. | Diagnostic Tool, Multimeter |
| Inspect Wiring and Connections | Inspect the wiring and connections associated with sensor “D” for signs of damage, loose connections, or corrosion that may result in high voltage readings. | Flashlight, Multimeter |
| Check for Electrical System Issues | Investigate the electrical system for potential problems such as short circuits, blown fuses, or damaged relays that could be causing the high voltage readings from sensor “D”. | Circuit Tester, Flashlight, Multimeter |
| Replace Faulty Sensor | If the sensor is found to be defective, replace it to restore accurate temperature monitoring and prevent potential overheating. | Replacement Sensor |
| Clear Codes and Test Drive | After completing repairs, clear the fault codes using an OBD-II scanner and take the vehicle for a test drive to confirm that the issue has been resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to ensure that the P0BD9 code does not return. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko