The P0B36: High Voltage Service Disconnect Circuit High code indicates that the voltage in the high voltage service disconnect circuit is higher than expected. This could be due to a faulty disconnect switch, wiring problems, or other electrical issues. If left unresolved, it may prevent the proper isolation of high voltage components, posing a safety risk to the system.
P0B36 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P0B36: High Voltage Service Disconnect Circuit High |
| Is it serious? | Yes, high voltage can lead to improper isolation of high voltage components and pose a safety risk. |
| Possible causes | – High voltage in high voltage service disconnect circuit – Faulty disconnect switch – Wiring or electrical issue |
| How to diagnose? | – Measure voltage in high voltage service disconnect circuit – Test disconnect switch functionality – Inspect wiring and electrical system |
P0B36 Meaning
The P0B36 code is set when the voltage in the high voltage service disconnect circuit exceeds the expected range. This can result from a faulty disconnect switch, wiring problems, or other electrical faults. If not addressed, high voltage in this circuit can affect the system’s ability to safely isolate high voltage components, leading to potential safety risks or system failures.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional related codes that might give further insight into the issue. | OBD-II Scanner |
| Measure Voltage in High Voltage Service Disconnect Circuit | Use a multimeter to measure the voltage in the high voltage disconnect circuit and compare it to manufacturer specifications. | Multimeter |
| Test Disconnect Switch Functionality | Test the disconnect switch to ensure it is operating within specifications. Replace if faulty. | Multimeter, Diagnostic Tool |
| Inspect Wiring and Electrical System | Inspect the wiring and connections for any damage, corrosion, or loose connections that may be causing high voltage. | Flashlight, Multimeter, Safety Gloves |
| Clear the Code and Test Drive | After repairs, clear the code and take the vehicle for a test drive to ensure the issue is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | Rescan the vehicle after the test drive to ensure that the P0B36 code does not return. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko