The P0472: Exhaust Pressure Sensor ‘A’ Circuit Low refers to an issue where the exhaust pressure sensor is reporting a low voltage signal. This sensor monitors the pressure in the exhaust system, and a low signal could indicate a malfunctioning sensor, insufficient voltage supply, or wiring problems. This can affect the overall performance of the engine and emissions control.
P0472 – Quick Overview
| Meaning | P0472: Exhaust Pressure Sensor ‘A’ Circuit Low |
| Is it serious? | Yes, this code can cause incorrect readings that affect engine performance and emissions. It should be addressed promptly. |
| Possible causes | – Faulty exhaust pressure sensor – Low voltage supply – Wiring issues |
| How to diagnose? | – Test the exhaust pressure sensor for low input – Check voltage supply to the sensor – Inspect wiring for faults |
P0472 Meaning
The P0472: Exhaust Pressure Sensor ‘A’ Circuit Low indicates that the sensor responsible for monitoring exhaust pressure is sending a voltage signal that is too low. This could result from a malfunctioning sensor, inadequate voltage supply, or a problem with the wiring. Inaccurate pressure readings can lead to poor engine performance and increased emissions, which is why it’s important to resolve the issue.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional codes that might point to related problems with the exhaust system. | OBD-II Scanner |
| Inspect the Exhaust Pressure Sensor | Visually inspect the exhaust pressure sensor for signs of damage or loose connections. Ensure it is properly attached. | Flashlight, Safety Gloves |
| Test the Exhaust Pressure Sensor for Low Input | Using a multimeter, test the sensor’s voltage input to ensure it falls within the manufacturer’s specified range. | Multimeter, Manufacturer’s Specifications |
| Check Voltage Supply | Verify that the exhaust pressure sensor is receiving the proper voltage supply. If the voltage is too low, inspect the power source and connections. | Multimeter, Vehicle’s Wiring Diagram |
| Inspect Wiring and Connectors | Carefully inspect the wiring and connectors leading to the exhaust pressure sensor for any signs of wear, damage, or corrosion. | Flashlight, Multimeter |
| Repair or Replace Faulty Components | If damaged wiring or a faulty sensor is found, repair or replace them as necessary. | Wire Strippers, Replacement Exhaust Pressure Sensor |
| Clear the Code and Test Drive | After completing repairs, clear the P0472 code using an OBD-II scanner. Take the vehicle for a test drive to ensure the problem is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to ensure the P0472 code has not returned. If it does, further diagnosis may be required. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko