The P0262: Cylinder 1 Injector Circuit High indicates that the injector circuit for Cylinder 1 is experiencing high voltage. This issue can arise from a malfunctioning fuel injector, wiring problems such as shorts or opens, or a failure in the Powertrain Control Module (PCM). When this code is triggered, it suggests that Cylinder 1 is receiving excessive electrical power, which can disrupt the proper functioning of the fuel injector and lead to engine performance issues.
P0262 – Quick Overview
| Meaning | P0262: Cylinder 1 Injector Circuit High |
| Is it serious? | Yes, this code can be serious as it can lead to improper fuel injection, causing engine misfires, poor performance, and increased emissions. |
| Possible causes | – High voltage in the injector circuit for Cylinder 1 – Faulty fuel injector for Cylinder 1 – Wiring issues such as shorts or opens – Faulty PCM |
| How to diagnose? | – Test the injector circuit for Cylinder 1 for proper operation. – Check for high voltage in the circuit. – Inspect the wiring and connectors for defects. – Replace or repair any faulty components. |
P0262 Meaning
The P0262: Cylinder 1 Injector Circuit High code means that the electrical circuit supplying power to the injector for Cylinder 1 is experiencing unusually high voltage. This can lead to the injector malfunctioning, causing issues like poor fuel delivery, engine misfires, and potentially higher emissions from the vehicle.
Step-by-step diagnostic guide
Follow the outlined procedure to diagnose this DTC by eliminating possible causes one by one.
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to see if any additional codes are present, as these may provide more information about the underlying issue. | OBD-II Scanner |
| Test Voltage in Cylinder 1 Injector Circuit | Measure the voltage in the injector circuit for Cylinder 1 using a multimeter. Compare the readings to the manufacturer’s specifications to determine if the voltage is too high. | Multimeter, Manufacturer’s Specifications |
| Inspect Cylinder 1 Fuel Injector | Visually inspect the fuel injector for Cylinder 1 for any signs of damage or malfunction due to high voltage. | Flashlight, Safety Gloves |
| Check Wiring and Connectors | Inspect the wiring and connectors leading to the injector for any signs of short circuits, opens, or other defects. | Flashlight, Multimeter |
| Repair or Replace Faulty Wiring/Components | If any wiring or components are found to be faulty, repair or replace them to ensure a proper electrical connection and voltage regulation. | Wire Strippers, Electrical Tape, Replacement Wires/Connectors |
| Check the PCM (Powertrain Control Module) | Inspect the PCM for any faults that could be causing the high voltage in the injector circuit. If necessary, reprogram or replace the PCM. | OBD-II Scanner, Multimeter |
| Clear the Code and Test Drive | After making repairs, clear the P0262 code using the OBD-II scanner and take the vehicle for a test drive to ensure the issue is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, scan the vehicle again to ensure the P0262 code has not returned. If it does, further diagnosis may be required. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko